IAI America RCA2-SA6R - Manual (Page 80)

72
13. Maintenance Inspection
[7] Align the marking on the motor shaft with the point indicated and insert the replacement motor unit
into the actuator.
[8] Take out the motor unit and the replacement jig (large). (Do not allow the jig to turn.)
[9] In order to keep the jig from turning, draw a mark using a pen or marker.
[10] Insert the replacement jig (small) in such a way that its protrusion is aligned with the groove in the
motor shaft.
Motor shaft
Alignment mark
Top view
Replacement jig (small)