IAI America RCA2-SA6R - Manual (Page 65)

57
1
1. Notes on Operation
11.1.2 External force in axial direction
Be careful not to subject the actuator to an external force or an impact load in the axial or thrust direction
in excess of allowable capacity.
Subjecting the actuator to an external force or an impact load at levels above the allowable capacity may
damage or destroy internal components.
Allowable external force in thrust direction
Unit: N (kgf)
SA3 50 (5.1)
SA4 160 (16.3)
SA5 220 (22.4)
SA6 220 (22.4)
“Motor unit type”
Thrust direction
Move the slider by observing the cautionary information below.
[Low-lead type]
Sometimes the slider may not move even when an external force is applied. In this case, do not forcibly
move the slider, but use the PC software or teaching pendant to jog the slider.
Caution: If the slider does not move, do not move it forcibly. If an excessive force is applied,
actuator damage may occur such as broken nut.