IAI America IX-INN8040H - Manual (Page 17)

11
5.2 IX-INN50 H/60 H/70 H/80 H
Secure the arms with arm locking plates, and loop the cables around the base and secure them with adhesive
tape, etc.
If a crane is used, install the supplied eye-bolts (2 pcs) on the robot and transport the robot using the eye-bolts.
Remove the top cover of arm 1 and install the eye-bolts in the positions shown in the figure.
IX-INN50 H/60 0 7 N N I - X I H H/80 H
• It is dangerous not to secure the cables because they may be dragged and catch your feet.
• Do not attempt to transport or move the robot by directly carrying it, because you may hurt your back or
drop the robot onto your feet.
• If the robot drops during transport you may be pinned down and sustain serious injury.
• Never stand underneath the robot while it is suspended,
• Use an appropriate hoist and ropes whose payload is sufficiently greater than the mass of the robot.
• If any machine or means is used that requires a specified qualification, it must be operated by a person
having the required qualification.
Warning Danger
Remove the cover and install the
supplied eye-bolts in the
positions shown in the figure. Remove the cover and install the
supplied eye-bolts in the
positions shown in the figure.
Secure each arm with a plate. Secure each arm with a plate.
Loop the cables around the base
and secure them with tape, etc.
Must be higher t
han the
landing surface.