KB Electronics KBDF-48 - Manual (Page 9)

9
4 SAFETY WARNING
Definition of Safety Warning Symbols
Electrical Hazard Warning Symbol: Failure to observe this warning could result in
electrical shock or electrocution.
Operational Hazard Warning Symbol: Failure to observe this warning could result in
serious injury or death.
This product must be installed and serviced by a qualified technician,
electrician, or electrical maintenance person familiar with its operation and the hazards
involved. Proper installation, which includes electrical connections, fusing or other
current protection, and grounding, can reduce the chance of electrical shocks, and fires,
in this product or products used with this product, such as electric motors, switches,
coils, solenoids, and relays. Do not use this drive in an explosion-proof application. Eye
protection must be worn and insulated adjustment tools must be used when working
with drive under power. This product is constructed of materials (plastics, metals,
carbon, silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and
filtering of this product can reduce the emission of radio frequency interference (RFI)
which may adversely affect sensitive electronic equipment. It is the responsibility of the
equipment manufacturer and individual installer to supply this Safety Warning to the
ultimate end user of this product. (SW 8/2012)
The drive contains electronic Start/Stop circuits, which can be used to start and stop the
drive. However, these circuits are never to be used as safety disconnects since they are
not fail-safe. Use only the AC Line for this purpose.
Be sure to read and follow all instructions carefully. Fire and/or electrocution can result
due to improper use of this product.
This product complies with all CE directives pertinent at the time of manufacture.
Contact our Sales Department for Declaration of Conformity. Installation of a CE approved RFI
filter is required. See RFI Filters & Chokes Selection Guide D-321 (Part No. A42027) for the
selection of filters to meet the Industrial or Residential Standard. Additional shielded cable
and/or AC Line cables may be required.