LEESON SM Series Sub-Micro Inverters - Manual (Page 21)

11.2 TWO-WIRE START/STOP CONTROL
NOTES:
1. Close TB-1 to TB-11 to RUN and open to STOP. TB-1 functions as a RUN input for
two-wire start/stop circuits, and a STOP input for three-wire start/stop circuits. Refer to
Section 11.3.
2. If reverse direction is required, set ROTATION (Parameter 17) to FORWARD AND
REVERSE (02), and program TB-13A (Parameter 10) to RUN REVERSE (06). Close
TB-13A to TB-11 to RUN in the reverse direction, and open to STOP.
3. For 0-10 VDC or 4-20 mA speed control, set STANDARD SPEED SOURCE (Parameter
05) to 0-10 VDC (03) or 4-20 mA (04).
1 2 5 6 11 13A 13B 13E 25 16 17
MAINTAINED
RUN/STOP CONTACT
(FORWARD)
MAINTAINED
RUN/STOP CONTACT
(REVERSE)
FORM A
RELAY
RUN
SIGNAL COMMON
0-10 VDC INPUT
SPEED POT POWER SUPPL
Y
DIGIT
AL INPUT REFERENCE
TB-13A FUNCTION SELECT (RUN REVERSE) TB-13B FUNCTION SELECT TB-13E FUNCTION SELECT
4-20 mA INPUT
17