LEESON SM Series Sub-Micro Inverters - Manual (Page 32)

28
FACTORY
NO. PARAMETER NAME RANGE OF ADJUSTMENT
DEFAULT
30 SLIP COMPENSATION 0.0 - 5.0 % 0.0 %
31-37 PRESET SPEEDS 0.0 - MAXIMUM FREQUENCY 0.0 Hz
38 SKIP BANDWIDTH 0.0 - 10.0 Hz 0.0 Hz
39 SPEED SCALING 0.0 - 6500.0 0.0
42 ACCEL / DECEL #2 0.1 - 3600.0 SEC 20.0 SEC
44 PASSWORD 000 - 999 225
45 SPD AT MIN SIGNAL MINIMUM FREQUENCY - 999 Hz 0.0 Hz
46 SPD AT MAX SIGNAL MINIMUM FREQUENCY - 999 Hz 60.0 Hz
47 CLEAR HISTORY MAINTAIN (01), CLEAR (02) MAINTAIN (01)
48 PROGRAM USER SETTINGS (01), OEM SETTINGS (02), RESET
SELECTION RESET OEM (03), RESET 60 (04), 60 (04)
RESET 50 (05), TRANSLATE (06)
50 FAULT HISTORY (VIEW - ONLY) (N/A)
51 SOFTWARE CODE (VIEW - ONLY) (N/A)
52 DC BUS VOLTAGE (VIEW - ONLY) (N/A)
53 MOTOR VOLTAGE (VIEW - ONLY) (N/A)
54 LOAD (VIEW - ONLY) (N/A)
55 0 - 10 VDC INPUT (VIEW - ONLY) (N/A)
56 4-20 mA INPUT (VIEW - ONLY) (N/A)
57 TB STRIP STATUS (VIEW - ONLY) (N/A)
58 KEYPAD STATUS (VIEW - ONLY) (N/A)
PARAMETER MENU (cont)