Document Outline

• About this guide
• Get Ready
  • Unpacking your boxes
  • Before installing the software
• Installing the Software
  • What you’ll find in this chapter
  • What is on the CD
  • Install the E6474A software
  • Install Analysis Reporter software
  • Verifying your software installation
    • An option will appear in your program listing.
    • Start the software and check your license options
  • Support & Software Update Service (SUS) Registration Procedure
    • Registration process
    • Add an additional contact person
      • Benefits of SUS registration
• Set Up Your System
  • What you’ll find in this chapter
  • Phones
    • Overview
    • Phone connection using a USB port
    • Phone connection using direct serial (RS-232) port
  • Agilent Digital Receivers
    • Overview
    • Connecting a single W1314A receiver
    • Connecting multiple W1314A receivers
    • Power Distribution Module (PDM) for the W1314A Receivers
    • Using a Combiner antenna connection (Agilent W1314A)
    • Connecting a single E645xC receiver
    • Connecting multiple E645xC receivers
      • To connect multiple E645xC receivers:
    • Pulse trigger E645xC receivers
  • GPS
    • Overview
    • Agilent digital receiver internal GPS
    • Agilent digital receiver external GPS
      • Example 1 - Using the internal GPS with a differential GPS antenna.
      • Example 2 - Using Placer GPS 455
      • Example 3 - Placer 455 with differential GPS
    • Indoor positioning
  • Batteries
    • Checking the remaining charge
    • Charging the battery
    • Safe handling and disposal
  • Indoor Setup
    • Overview
    • Setting up the timing module
    • How to switch batteries during calibration
    • Cable connections for indoor hardware
    • Cable routing through the shoulder straps
      • Adjusting the backpack harness
    • How to reset the 1PP2S output on the timing module
  • License Manager
    • Introduction
    • For more information
• Use Your System
  • What you’ll find in this chapter
  • Turning the power on
    • Battery charging
  • Starting the software
    • To start the software
      • Confirm your license options
      • To check your license options.
  • Using the software
    • Overview
      • Project Mode Overview
      • File Mode Overview
    • Introduction - Starting the application
    • Creating a new project
      • How to create a new project:
    • Creating a new file
      • How to create a new file:
    • Tour of the User Interface
      • Description of user interface
    • Adding Hardware
      • Adding hardware (Manually - no devices connected to your laptop)
      • Adding hardware (Automatically - with devices connected to your laptop)
      • Adding receiver measurements
    • Tour of Data Items
    • The Sequencer
      • To create a test sequence
    • Views
      • To build a simple view from a common view
    • Mapping
      • To add a map
      • To add data items to your map
      • Adding a cellsite database to a map
      • How to use the cellsite importer
      • How to add a valid cellsite to a map
    • How to add and configure an indoor map
      • How to load and configure an indoor map
      • How to collect indoor measurements
    • Collecting Data
      • To collect data
      • Overview of collection and playback controls
      • Click’n’Sync data display
    • Events
      • Overview
      • How to add a new event to the event library
      • How to copy an event from the event library into your active project
      • What events do you have in your project?
      • Sharing (Import/Export) you events with other users
    • Sharing Projects and Data
      • To export a project with data
      • To import a project with data
      • To import an SD5 file
      • To export your views
      • How to add views to an existing exported views file
      • How to import custom views
• Get Results Fast
  • What you’ll find in this chapter
  • Using the Online Training
    • To open a training topic
  • Online Help
    • Accessing Online Help
    • To search the help
  • Documentation Library
• Getting Assistance, If You Need It
  • What you’ll find in this chapter
  • Troubleshooting your E6474A system
    • Device communication problems
      • Causes
      • Remedies
    • Setting an iDEN phone’s baud rate
    • Toshiba phone power-up issues
      • Toshiba direct-connect phone power-up
      • Toshiba 10-CT
      • Toshiba C-103T
      • Toshiba 301T
  • Online Frequently Asked Questions
  • Updating Receiver Firmware
    • Replacement firmware security key
  • Contacting Customer Support
    • Technical telephone assistance
    • Numbers to call
  • Returning the System for Service
    • Warranty repair
    • Preparing the system for shipping
• Safety and Regulatory Information
  • Overview
  • Warning and caution notices
  • General safety considerations
  • Installation, Use, and Storage
  • Signal and input power
  • Symbols
  • Declaration of Conformity - Agilent E64xx RF Receivers
  • Declaration of Conformity - Agilent W1314A Receivers
• Connection Panels and LED Indicators
  • Overview
  • Agilent W1314A Receivers
  • E645xC Receiver
  • Trimble Placer GPS 455DR
  • Fei-Zypher Timing Module
• Specifications
  • What you’ll find in this chapter
  • Computer Hardware and Software Requirements
  • Battery Specifications (W1314A-070)
    • Charger specifications
    • Battery disposal
    • Power cable
  • Receiver Specifications
    • W1314A receiver specifications
    • E6450C CDMA PCS 1.9 GHz receiver specifications
    • E6451C GSM900 receiver specifications
    • E6452C CDMA/TDMA cellular band receiver specifications
    • E6457C Japan CDMA cellular band receiver specifications
    • E6453C GSM1800 and Korean CDMA band receiver specifications
    • E6454C 1.9 GHz CDMA/GSM1900 receiver specifications
    • E6455C 2.1 GHz W-CDMA/UMTS/cdma2000 receiver specifications
    • E6456C 1.9 GHz W-CDMA/UMTS/cdma2000 receiver specifications
    • E6458C GSM 850 receiver specifications
    • E6458C-100 GSM/UMTS 850 and PCS 1900 receiver specifications
    • E7456C iDEN/CDMA RF receiver specifications
  • W1314A Antenna Specifications
  • Phone Support
    • To view a list of supported phones:
  • Options and Part Numbers
    • W1314A replacement parts list
    • Antenna kit part numbers
    • Agilent E645xC receivers
    • Hardware included with E6474A software licenses
• Permanent In-Vehicle Hardware Installation
  • In-Vehicle Installation Guidelines
  • Recommended Tools
  • Installation Overview
  • Installing the Mounting Plate
  • Attaching the Receiver to the Mounting Plate
    • To attaching the receiver to the mounting plate
    • To detach the receiver
  • Installing the PDM in the Vehicle
    • Connecting Cables to the PDM
    • Connecting the PDM to the Vehicle's Battery
  • Mounting the E645x receiver
  • Antenna Installation
    • Installation guidelines
• Index