ZOLL M Series Defibrillator Rev YC - Manual (Page 12)

M S ERIES C ONFIGURATION G UIDE
8
Device Identifier
Sets an eleven-digit device identifier code. This code is divided into two sub codes (Site ID,
eight alphanumeric characters, and Device ID, three alphanumeric characters). The device
identifier is printed on the 12-lead strip chart, summary report, fax and Catalyst
™
MUSE
®
printouts.
Catalyst MUSE is a registered trademark of GE Medical Systems.
Note: If you are transmitting 12-lead ECG data to a Catalyst MUSE system, it is
recommended that you set up the device identifier.
Pressing the Change Value softkey causes the following screen to display:
Pressing the Prev Letter softkey moves the highlight left to the previous entered digit.
Pressing the Inc Letter or Dec Letter softkeys increments or decrements the selected digit.
Pressing the Next Letter softkey moves the highlight right to the next digit to be entered.
Pressing the Enter softkey selects the values that have been entered and returns to main
configuration menu.
Manual Mode Passcode (Advanced AED Models)
Allows the three-digit Manual Mode Passcode to be set or changed. Each digit entered can only
be set between 0 (zero) and 3 (three) inclusive.
Entering “000” as the pass code disables password protection of the Manual Mode. When “000”
is selected, no password is required to enter the Manual Defibrillation Mode.
Pressing the Change Value softkey causes the following screen to display:
Pressing the Prev Digit softkey moves the highlight left to the previous entered digit.
Pressing the Inc Digit or Dec Digit softkeys increments or decrements the selected digit.
Pressing the Next Digit softkey moves the highlight right to the next digit to be entered.
Pressing the Enter softkey selects the values that have been entered and returns to main
configuration menu.
6\VWHP&RQILJXUDWLRQ
,QF
/HWWHU
'HF
/HWWHU
3UHY
/HWWHU
1H[W
/HWWHU

(QWHU
6HW6LWH,'
 
6HW'HYLFH,'

6\VWHP&RQILJXUDWLRQ
,QF
'LJLW
'HF
'LJLW
3UHY
'LJLW
1H[W
'LJLW

(QWHU
6HW0DQXDO3DVVFRGH