3 packing list – IEI Integration EC-1040G User Manual
Page 31
EC-1040GB Workstation
Page 21
Step 3:
Use box cutters, a knife or a sharp pair of scissors to open the top of the internal
(first) box.
Step 4:
Lift the workstation out of the boxes.
Step 5:
Remove both polystyrene ends from each side.
Step 6:
Pull the plastic cover off the workstation.
Step 7:
Make sure all the components listed in the packing list are present.
Step 0:
4.2.3 Packing List
NOTE:
If some of the components listed in the checklist below are missing, please do
not proceed with the installation. Contact the IEI reseller or vendor you
purchased the AC-KIT-883HD audio module from or contact an IEI sales
representative directly. To contact an IEI sales representative, please send an
email to
.
When the EC-1040GB rackmount workstation is received, make sure all the components
listed below are present.
Quantity Description
Image
2 Door
key
2 Handle