4 remove the drive slot blank plate, Figure 4-4: drive bracket retention screws – IEI Integration EC-1040G User Manual
Page 38
Advertising
EC-1040GB Workstation
Page 28
Step 1:
Remove four retention screws that secure the drive bracket to the chassis
(Figure 4-4).
Figure 4-4: Drive Bracket Retention Screws
Step 2:
Remove the drive bracket from the chassis.
Step 0:
4.5.4 Remove the Drive Slot Blank Plate
The drive bracket has three 5.25” and one 3.5” drive slot blank plates. To remove the drive
slot blank plates, please follow the steps below.
Step 1:
Remove the retention screws that secure the drive slot blank plate to the drive
bracket (Figure 4-5).
Advertising