4 installation procedures, 1 preinstalled components, 2 user installed components – IEI Integration EC-1040G User Manual
Page 34: 3 installation steps, Nstallation, Rocedures
EC-1040GB Workstation
Page 24
screen should be placed face down on a soft working mat.
4.4 Installation Procedures
4.4.1 Preinstalled Components
The following components are preinstalled in the EC-1040GB rackmount workstation.
Power supply unit (PSU)
Cooling
fan
modules
Drive
brackets
LCD
screen
4.4.2 User Installed Components
The following user supplied components need to be installed into the EC-1040GB
rackmount workstation:
Disk
drives
Backplane and CPU card, or motherboard
PCI or ISA expansion cards (optional)
Keyboard
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Step 1:
Open the top cover.
Step 2:
Remove the CPU card clamp.
Step 3:
Remove the disk drive brackets.
Step 4:
Install the disk drives.
Step 5:
Reinstall the disk drive bracket with the installed disk drives.
Step 6:
Install the backplane.
Step 7:
Install the CPU card.