2 remove the cpu card clamp, 3 remove the drive bracket, Figure 4-3: cpu card clamp retention screws – IEI Integration EC-1040G User Manual
Page 37
Advertising
EC-1040GB Workstation
Page 27
4.5.2 Remove the CPU Card Clamp
The CPU card clamp is secured to the EC-1040GB rackmount workstation with four
retention screws. To remove the CPU card clamp, please follow the steps below.
Step 1:
Remove four retention screws that secure the CPU card clamp to the chassis
(Figure 4-3).
Figure 4-3: CPU Card Clamp Retention Screws
Step 1:
Remove the CPU card clamp from the chassis.
Step 0:
4.5.3 Remove the Drive Bracket
The drive bracket is secured to the EC-1040GB rackmount workstation with four retention
screws. To remove the drive bracket, please follow the steps below.
Advertising