10 install the pci/isa expansion card, Figure 4-13: install the cpu card – IEI Integration EC-1040G User Manual
Page 48
Advertising
EC-1040GB Workstation
Page 38
Figure 4-13: Install the CPU Card
Step 4:
To secure the CPU card, reinsert the previously removed slot cover retention
screw.
Step 5:
If a PCI/ISA expansion card is not being installed, reinstall the hold down clamp.
If a PCI/ISA expansion card is being installed, proceed to the next section.
Step 0:
4.5.10 Install the PCI/ISA Expansion Card
To install a PCI expansion card or an ISA expansion card please follow the instructions
below.
Step 1:
Remove the slot cover at the back of the chassis. To do this, remove the slot
cover retention screw at the top of the slot cover.
Advertising