Figure 5-3: psu mounting bracket retention screws – IEI Integration EC-1040G User Manual
Page 64
EC-1040GB Workstation
Page 54
Figure 5-3: PSU Mounting Bracket Retention Screws
Step 8:
Reattach the PSU mounting bracket to the new PSU with the two previously
removed retention screws.
Step 9:
Install the new PSU into the workstation making sure the PSU power connector
and PSU cooling fan are facing out of the workstation.
Step 10:
Reinsert the two previously removed internal retention screws that secure the
PSU assembly to the right side panel of the workstation.
Step 11:
Reinsert the three previously removed external retention screws that secure the
PSU assembly to the rear panel of the workstation.
Step 12:
Close the back cover of the workstation and reinstall the workstation into the
cabinet or rack in which it was previously installed. Refer to Section 4.6 for
complete mounting instructions.