Watlow LogicPro - Manual (Page 192)

Chapter 11: User Defined Function Blocks LogicPro User’s Guide
176 Watlow Anafaze Doc.# 28002-00 Rev 3.00
To build a UDFB in simulation mode:
1. Select the File menu.
1. Select the UDFB menu
2. Select Build Simulation Lib . The Build UDFB
Library for Simulation dialog box appears, as shown
in Figure 11.5.
Figure 11.5 Build UDFB Library for Simulation
Dialog Box
3. Select the UDFBs that you want to include in the library.
Only those UDFBs which are selected will be in the
library.
4. Click [OK] . LogicPro compiles these files and builds a
library with the pre-defined macro SIMULATION .
The library is named UDFB.lib with a prefix indicating the
kind of resource that is currently open.
The library is stored in the following directory:
\logicpro\simulate\bc
After the simulation UDFB library is built successfully, you
can use the UDFB in a Ladder diagram as a standard Function
Block in simulation. When the Program is compiled and
linked for simulation, the simulation library is automatically
linked by LogicPro.