Watlow LogicPro - Manual (Page 281)

LogicPro User’s Guide Chapter 17: Dynamic Data Exchange
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 265
Figure 17.1 Example 1
NOTE! Before you can open LogicPro, you must close
the DDE Server. Before downloading the
Example1 Program, make sure that the resource
is set to the correct platform.
To download the Example 1 Program:
1. Open the LogicPro Development Environment .
2. Select the Execution menu.
3. Select Build All and Run.
4. LogicPro compiles the Program and automatically
downloads it to the target platform.
5. To verify that the Program is successfully running, you
can select the
View menu and then Monitor On/Off . If
the timer is counting, the Program is running and you can
start the LogicPro DDE Server and begin the Excel
spreadsheet example.