Digital_out_206x – Watlow LogicPro User Manual
Page 214
Chapter 12: Function Blocks
LogicPro User’s Guide
198
Watlow Anafaze
Doc.# 28002-00 Rev 3.00
Digital_Out_206x
The Digital_Out_206x driver supports the relay outputs on the PPC-
206x Digital Out series modules.
To associate a variable with a relay output:
1.
Open the
Add Program/Resource Variable
dialog box.
2.
Enter a unique variable
Name
.
3.
Select
BOOL
from the
Type
list.
4.
Select
Output
by clicking the check box.
5.
Select
Digital_Out_206x
from the
IO Driver
list.
6.
Select
BIT
from the
IO Size
list.
7.
Enter the
IO Physical Address
. The address is:
X.Z
X is the module address (41-46)
Z is the module I/O number (1-16)
8.
Click
[OK]
.
PPC-206x Digital Out Addressing Example
To create a variable named Relay_6 that sets the state of the 6
th
output on a PPC-206x module with its rotary address switch set to
41, set the options in the Add Program/Resource Variable
dialog box as illustrated below.