Watlow LogicPro - Manual (Page 209)

LogicPro User’s Guide Chapter 12: Function Blocks
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 193
PPC-2010 Processor Module Addressing Example
To create a variable named My_Dig_Out that sets the value of the
23
rd
output on a PPC-2010 module, set the options in the Add
Program/Resource Variable dialog box as illustrated below.
NOTE! The PPC-2010's module address is 0 (zero).
Analog_In_202x
The Analog_In_202x driver supports the inputs on the PPC-202x
series Analog In modules:
To associate a variable with an analog input:
1. Open the Add Program/Resource Variable dialog box.
2. Enter a unique variable Name .
3. Select INT from the Type list.
4. Select Input by clicking the check box.
5. Select Analog_In_202x from the IO Driver list.
6. Select WORD from the IO Size list.
7. Enter the IO Physical Address. The address is:
X.Z
X is the module address (1-4)
Z is the module I/O number (1-32).
8. Click [OK] .