Deleting a program, Figure 5.5—delete program dialog box – Watlow LogicPro User Manual
Page 63
LogicPro User’s Guide
Chapter 5: Programs
Doc.# 28002-00 Rev 3.00
Watlow Anafaze
47
Deleting a Program
To delete an existing Program:
1.
Select the
File menu
.
2.
Select
Delete
.
3.
Select
Program
. The
Delete Program
dialog box ap-
pears, as shown in Figure 5.5.
4.
Select the Program you want to delete.
Multiple Programs can be selected by clicking on one
Program name after another. To deselect a Program click on
its name a second time.
5.
Click
[OK]
. A message dialog box appears to confirm
that you want to delete the Program and all its associated
variables.
NOTE !
If you click [OK], you remove the Program from
the list and delete all associated files. There is no
way to recover this information, so be certain you
want to delete these files before you click [OK].
6.
Click
[OK
] to delete the Program
-or-
[Cancel]
to abort the deletion.
Figure 5.5
Delete Program Dialog Box