Working with udfb files, Editing udfb files, Opening udfb files – Watlow LogicPro User Manual
Page 193: Closing udfb files
LogicPro User’s Guide
Chapter 11: User Defined Function Blocks
Doc.# 28002-00 Rev 3.00
Watlow Anafaze
177
Working with UDFB Files
The following sections describe how to work with UDFB
files.
Editing UDFB Files
When UDFB header or C files are active on the window, the
Undo, Cut, Copy and Paste commands in the Edit menu are
enabled. You can use these functions to edit text.
Opening UDFB Files
To Open UDFB files:
1.
Select
File
.
2.
Select Open.
3.
Select
User Defined Function Block
to open the
header and C files of the selected UDFB. The
Open
User Defined Function Block
dialog box, shown in
4.
Select the UDFB you want to open.
5.
Click
[OK]
.
Figure 11.6 Open User Defined Function Block
Dialog Box
Closing UDFB Files
To Close UDFB files:
1.
Select
File
.
2.
Select
Close
.