Watlow LogicPro - Manual (Page 46)

Chapter 3: Projects LogicPro User’s Guide
30 Watlow Anafaze Doc.# 28002-00 Rev 3.00
1. Select the File menu.
2. Select Backup .
3. Select Project . The Copy Project dialog box appears,
as shown in Figure 3.5.
4. Select the Project to be backed up from the list of
Existing Project(s) . Enter the new name for the
backup copy of the project.
5. Select the drive and directory in which LogicPro should
place the copy.
NOTE! If you are backing up the project to protect it from
mechanical failure, then it should be stored on a
different disk drive or storage
media.
6. Click [OK] .
Figure 3.5 Copy Project Dialog Box