Yokogawa PH72 Personal pH/ORP Meter - Manual (Page 27)

IM 12B03D02-01E 3-4
3. Measurement
(2) Data storage
If the DATA key is pressed during measurement, mark starts flashing. Press the
F/ENT key, then currently measured data can be stored in nonvolatile memory. Data
stored are measured conductivity, measured temperature, date and time. Up to 300 data
including individually deleted data can be stored. If you attempt to store more data,
will be displayed.
If is displayed before the data number has reached 300, run defrag referring to
Section 5.3 (15), “Defrag memory (DFLG) panel.” This will free up memory occupied
by deleted data, allowing data to be stored newly. To check stored data, refer to Section
5.3 (1), “Display stored data (dAt) panel.”
Pressing DATA or MEAS key while mark is flashing cancels data storage and
returns the meter to measurement mode.
F030402.EPS
Abort data storage.
Execute data storage.
Press key to store data while is flashing.
While is flashing, press
or keys to abort data storage.
F/ENT
MEAS
DATA
DATA