Yokogawa PH72 Personal pH/ORP Meter - Manual (Page 47)

IM 12B03D02-01E 5-12
5. Keypad and Display Functions
(11) Initialize calibration parameters (I.CP) panel
Used to initialize the parameters saved by calibration to default settings: slope at 1.000
and asymmetry potential at 0.0 mV.
F050311.EPS
to toggle
to
proceed
F/ENT
to cancel F/ENT
to execute F/ENT
(12) Set temperature unit (tP.U) panel
Used to select the temperature unit: Celsius (
؇C) or Fahrenheit (؇F). Use
keys to
select the desired temperature unit and press F/ENT key to confirm.
F050312.EPS
to toggle
F/ENT
to confirm F/ENT
(13) Check version number (VEr) panel
Used to check the version number of the program. This is not user configurable.
F050313.EPS
F/ENT