Yokogawa µR20000 - Manual (Page 155)

IM 04P02B01-01E
7-18
Applyng the Changes and Returnng to Operaton Mode
Press the key or SHIFT + key to select End and then press the key. Press
the key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basc= screen.
Explanaton
Keylock
Sets whether to use or not use the key lock function.
If Not is selected, the setup ends here.
Password
Sets the password for releasing the key lock. Set the password using numbers and
spaces within 4 digits.
Operaton of Keys to Be Key-Locked
Sets the operation of the keys to be key-locked. Select Lock or Free for each key
operation.
RCD:
RCD key
Feed: FEED key
Menu: MENU key
Disp Menu: MENU 1 key
Alarm ACK: Alarm ACK operation under the FUNC key
Math: Computation start/stop/reset operation under the FUNC key
(/M1 option)
Print out Printout start/stop/reset operation under the FUNC key
Message Message printout operation under the FUNC key
Buffer clear: Clear operation of the printout buffer memory under the FUNC key
Periodic: Clear operation of the report data of periodic printout under the FUNC
key
Pen exchange: Operation of moving the pen to an easily accessible position of
replacement under the FUNC key (pen model)
Ribbon exchange: Operation carried out when replacing the ribbon cassette with the
power turned ON under the FUNC key (dot model)
<Related Topcs> Activating/Releasing the key lock: Section 3.13
7.10 Settng the Key Lock Functon