Yokogawa µR20000 - Manual (Page 30)

IM 04P02B01-01E
For the procedure to set the functions, see section 1.10, “Function Setup Guide.”
1-14
1.4 Recordng
Trend Recordng
The measured values are printed within a width of 180 mm.
Recordng Method (Pen Model)
• The measured value is updated every scan interval and continuously recorded.
• The recording colors in order from channel 01 are red, green, blue, and violet.
Recordng Method (Dot Model)
• The most recent measured value is recorded with a dot every dot printing interval. The
dot printing interval is in the range of 10 s to 90 s. There are two recording methods
from which you can select. One method automatically adjusts the dot printing interval
according to the chart speed so that the dots do not overlap. The other method
records at the fastest dot printing interval at all times.
• The recording colors are assigned to each set (channels 01-06, 07-12, 13-18, and
19-24) of six channels in ascending order as follows: purple, red, green, blue, brown,
and black. The recording color of each channel can be changed among these six
colors.
• For each channel, trend recording can be enabled or disabled.
<Related Topcs> Setting the trend recording interval: Section 6.1
Changing the recording color: Section 7.5
Enabling/Disabling trend recording for each channel: Section 6.6
Chart Speed
On the pen model, the chart speed can be selected from 82 settings in the range of 5 to
12000 mm/h.
On the dot model, the chart speed can be set in the range of 1 to 1500 mm/h in 1-mm
steps.
The default setting is 25 mm/h.
<Related Topcs> Setting the chart speed: Section 5.4
Zone Recordng
A recording zone is assigned to each channel. This function is useful such when the
recording results overlap making them difficult to be viewed.
Zone 1 Zone 2 Zone 3 Zone 4
<Related Topcs> Setting the zone recording: Section 6.4