Yokogawa µR20000 - Manual (Page 171)

IM 04P02B01-01E
7-34
Select set menu
Setting complete
The new setting takes effect.
From the previous page
(/BT1 option)
(/BT1 option)
Batch name=On Select whether to display Batch No.
and Lot No. in Setting mode. Select
On or Off.
Batch detail=On Select whether to display Batch
detail in Setting mode. Select On
or Off.
ESC/?
Calibration=On Select whether to display
Calibration in Setting mode.
Select On or Off.
Math=On Select whether to display Math in
Setting mode. Select On or Off.
(/M1 option)
(/CC1 option)
Applyng the Changes and Returnng to Operaton Mode
Press the key or SHIFT + key to select End and then press the key. Press
the key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basc= screen.
Explanaton
On: Display the menu in Setting mode.
Off: Do not display the menu in Setting mode when Customized Menu is enabled.
<Related Topcs> Enabling the Customized Menu: Section 7.22
7.21 Selectng to Show/Hde Settng Mode Menus