Overview of the virtual adx mib, Introduction, Obtaining and installing the virtual adx mibs – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 13: Chapter 1
Brocade Virtual ADX MIB Reference
1
53-1003312-01
Chapter
1
Overview of the Virtual ADX MIB
In this chapter
•
•
Obtaining and installing the Virtual ADX MIBs. . . . . . . . . . . . . . . . . . . . . . . . . 1
•
•
•
•
About SNMPv3 support on enterprise software releases . . . . . . . . . . . . . . . 3
Introduction
The Management Information Base (MIB) is a database of objects that can be used by a network
management system to manage and monitor devices on the network. The MIB can be retrieved by
a network management system that uses Simple Network Management Protocol (SNMP). The MIB
structure determines the scope of management access allowed by a device. By using SNMP, a
manager application can issue read or write operations within the scope of the MIB.
Obtaining and installing the Virtual ADX MIBs
You can obtain the MIBs by downloading the file from Brocade Technical Support site .
After obtaining the MIB, follow the instructions for your network management system to be able to
use the MIB with your system.
Downloading the MIB from technical support web site
To download the MIB from the Brocade Technical Support Web site, you must have a user name
and password to access the Brocade support site. Then do the following.
1. Open your Web browser and go to
my.brocade.com
.
2. Login with your user name and password.
3. Click the
downloads
tab.
4. Search for the product name. Each product release has a link for its corresponding MIB.
5. Navigate to the link for the MIB and either open the file or save it to disk.