Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 29)

Brocade Virtual ADX MIB Reference 17
53-1003312-01
Software Image
snAgImgLoad
brcdIp.1.1.2.1.7
Syntax: Integer Read-write Downloads or uploads a new software image to the agent. Use one of
the following values in an SNMP set:
•
uploadMPPrimary(19) – Uploads the primary image from the
management processor flash memory to the TFTP server.
•
downloadMPPrimary(20) – Downloads the primary image from
the TFTP server to management processor flash.
•
uploadMPSecondary(21) – Uploads the secondary image from
the management processor flash memory to the TFTP server.
•
downloadMPSecondary(22) – Downloads the secondary image
from the TFTP server to management processor flash.
•
downloadSPPrimary(24) – Downloads the secondary image from
the TFTP server to secondary processor flash.
•
downloadSPSecondary(25) – Downloads the secondary image
from the TFTP server to secondary processor flash.
The following messages may be displayed:
•
normal(1)
•
flashPrepareReadFailure(2)
•
flashReadError(3)
•
flashPrepareWriteFailure(4)
•
flashWriteError(5)
•
tftpTimeoutError(6)
•
tftpOutOfBufferSpace(7)
•
tftpBusy(8)
•
tftpRemoteOtherErrors(9)
•
tftpRemoteNoFile(10)
•
tftpRemoteBadAccess(11)
•
tftpRemoteDiskFull(12)
•
tftpRemoteBadOperation(13)
•
tftpRemoteBadId(14)
•
tftpRemoteFileExists(15)
•
tftpRemoteNoUser(16)
•
operationError(17)
•
loading(18) – operation is in process
•
uploadMPPrimary(19)
•
downloadMPPrimary(20)
•
uploadMPSecondary(21)
•
downloadMPSecondary(22)
•
tftpWrongFileType(23)
•
downloadSPPrimary(24)
•
downloadSPSecondary(25)
This object requires a password to be set for the snAgGblPassword
object.
snAgCfgFname
brcdIp.1.1.2.1.8
Syntax: DisplayString Read-write Shows the name of the configuration file, including its path, currently
associated with the system. If there are multiple configuration files,
the names are separated by semicolons (;). This object can have up to
32 characters.
Name, OID, and Syntax Access Description