Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 55)

Brocade Virtual ADX MIB Reference 43
53-1003312-01
Show statistics DOS-attack
Show statistics DOS-attack
The following objects have been created to provide DOS attack statistics through SNMP as shown
in the following table.
NOTE
The DOS-Attack Global MIBs are supported on the Virtual ADX products
DOS attack port table
The following objects have been created to filter traffic for DOS attacks through SNMP as shown in
the following table.
NOTE
The DOS-Attack port table MIBs are not supported on the Virtual ADX products
Name, OID, and Syntax Access Description
snDosAttackICMPDropCount
brcdIp.1.1.3.14.3.1.1
Syntax: Counter32 Read only Provides the contents of the ICMP drop counter.
snDosAttackICMPBlockCount
brcdIp.1.1.3.14.3.1.2
Syntax: Counter32 Read only Provides the contents of the ICMP block counter.
snDosAttackSYNDropCount
brcdIp.1.1.3.14.3.1.3
Syntax: Counter32 Read only Provides the contents of the SYN drop counter.
snDosAttackSYNBlockCount
brcdIp.1.1.3.14.3.1.4
Syntax: Counter32 Read only Provides the contents of the SYN block counter.
Name, OID, and Syntax Access Description
snDosAttackPortTable
brcdIp.1.1.3.14.3.2
Syntax: Sequence of
snDosAttackPortEntry None Denial of service attack port table.
snDosAttackPortEntry
brcdIp.1.1.3.14.3.2.1
Syntax: snDosAttackPortEntry None An entry of the denial of service attack port table.
snDosAttackPort
brcdIp.1.1.3.14.3.2.1.1
Syntax: Integer32 read only Index value of a port.
snDosAttackPortICMPDropCount
brcdIp.1.1.3.14.3.2.1.2
Syntax: Counter32 read only Value of the ICMP drop counter.