Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 228)

216 Brocade Virtual ADX MIB Reference
53-1003312-01
Monitor groups
Virtual server history table
The Virtual Server History Group table contains historical data samples that were collected for
virtual servers.
Each counter in this table identifies the same event as the counters used by the
“snL4VirtualServerStatisticEntry” ; however, the value of the counters in this table represents a
cumulative sum of a sampling period.
snL4VirtualServerHistoryControlOw
ner
brcdIp.1.1.4.28.5.1.6
Syntax: DisplayString Read-write The administrator who owns or configured this entry.
snL4VirtualServerHistoryControlSt
atus
brcdIp.1.1.4.28.5.1.7
Syntax: Integer Read-write The state of this entry:
•
valid(1)
•
createRequest(2)
•
underCreation(3)
•
invalid(4) – This entry will be deleted from the table if it is
changed to this state.
Name, OID, and Syntax Access Description
snL4VirtualServerHistoryTable
brcdIp.1.1.4.28.6 None The Virtual Server History Table.
snL4VirtualServerHistoryEntry
brcdIp.1.1.4.28.6.1 None An entry in the Virtual Server History Group table. An entry is a
historical sample of statistics on a particular virtual server. This
sample is associated with the
“snL4VirtualServerHistoryControlEntry” object, which sets up
the parameters for a regular collection of these samples.
snL4VirtualServerHistoryIndex
brcdIp.1.1.4.28.6.1.1
Syntax: Integer Read only Shows the index entry as identified by the
“snL4VirtualServerHistoryControlIndex” .
snL4VirtualServerHistorySampleIn
dex
brcdIp.1.1.4.28.6.1.2
Syntax: Integer Read only An index that uniquely identifies this particular sample among
all samples associated with the same entry. This index starts at
1 and increases by one as each new sample is taken. There can
be up to 214,748,3647 samples.
snL4VirtualServerHistoryIntervalSt
art
brcdIp.1.1.4.28.6.1.3
Syntax: Time ticks Read only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data
sampling to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, since each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4VirtualServerHistoryReceiveP
kts
brcdIp.1.1.4.28.6.1.4
Syntax: Counter Read only Shows the number of packets the ServerIron has received from
the virtual server.
Name, OID, and Syntax Access Description