Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 277
Brocade Virtual ADX MIB Reference
265
53-1003312-01
Virtual ADX traps
snOspfIfRxBadPacket
1.3.6.1.2.1.14.16.2.11
snOspfRouterId (The
originator of the trap)
snOspfIfStatusIpAddres
s
snOspfPacketSrc (The
source IP address)
snOspfPacketType
Warning
An OSPF packet has been received on a
non-virtual interface that cannot be
parsed.
Trap Message:
OSPF Router Id
<snOspfRouterId>, interface
<snOspfIfStatusIpAddress>
receive bad packet (type
<snOspfPacketType>) from
<snOspfPacketSrc>.
snOspfVirtIfRxBadPacket
1.3.6.1.2.1.14.16.2.12
snOspfRouterId (The
originator of the trap)
snOspfVirtIfStatusAreaI
D
snOspfVirtIfStatusNeig
hbor
snOspfPacketType
Warning
An OSPF packet has been received on a
virtual interface that cannot be parsed.
Trap Message:
OSPF router id
<snOspfRouterId>, virtual
interface
<snOspfVirtIfStatusAreaID>
received bad packet (type
<snOspfPacketType>) from
neighbor
<snOspfVirtIfStatusNeighbor>.
snOspfTxRetransmit
1.3.6.1.2.1.14.16.2.13
snOspfRouterId (The
originator of the trap)
snOspfIfStatusIpAddres
s
snOspfNbrRtrId
(Destination)
snOspfPacketType
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Warning
An OSPF packet has been retransmitted
on a non- virtual interface. All packets that
may be re- transmitted are associated with
an LSDB entry. The LS type, LS ID, and
Router ID are used to identify the LSDB
entry.
Trap Message:
OSPF router id
<snOspfRouterId> interface
<snOspfIfStatusIpAddress>
retransmitted packet type
<snOspfPacketType>,LSDB type
<snOspfLsdbType>, LSDB LS ID
<snOspfLsdbLsId> and LSDB
router id <snOspfLsdbRouterId>
to Neighbor router id
<snOspfNbrRtrId>.
ospfVirtIfTxRetransmit
1.3.6.1.2.1.14.16.2.14
snOspfRouterId (The
originator of the trap)
snOspfVirtIfStatusAreaI
D
snOspfVirtIfStatusNeig
hbor
snOspfPacketType
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Warning
An OSPF packet has been retransmitted
on a virtual interface. All packets that may
be retransmitted are associated with an
LSDB entry. The LS type, LS ID, and Router
ID are used to identify the LSDB entry.
Trap Message:
OSPF router id
<snOspfRouterId>, virtual
interface area id
snOspfVirtIfStatusAreaID>
retransmitted packet type
<snOspfPacketType>,LSDB type
<snOspfLsdbType>, LSDB LS ID
<snOspfLsdbLsId> and LSDB
router id <snOspfLsdbRouterId>
to Neighbor
<snOspfVirtIfStatusNeighbor>.
Trap Name and Number
Varbinds
Severity
Description and Trap Message