Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 221)

Brocade Virtual ADX MIB Reference 209
53-1003312-01
Monitor groups
• “Real server port history group” on page 213
• “Virtual server history control group” on page 214
• “Virtual server history table” on page 216
• “Virtual server port history control table” on page 217
• “Virtual server port history table” on page 219
Real server history control table
Real Server History Control Table contains objects that control the collection of data samples for
real servers.
Name, OID, and Syntax Access Description
snL4RealServerHistoryControlTable
brcdIp.1.1.4.28.1 None The Real Server History Control Table
snL4RealServerHistoryControlEntry
brcdIp.1.1.4.28.1.1 None An entry in the Real Server History Control Table.
snL4RealServerHistoryControlIndex
brcdIp.1.1.4.28.1.1.1
Syntax: Integer Read only An index that uniquely identifies an entry in this table. Each
entry defines a set of samples at a particular interval for a real
server on the ServerIron.
Valid values: Up to 65535 entries.
snL4RealServerHistoryControlData
Source
brcdIp.1.1.4.28.1.1.2
Syntax: Object Identifier Read-write This object identifies the source of the historical data that was
collected for this entry. The source can be any real server on
this ServerIron.
It identifies a particular instance defined in the
“snL4RealServerStatisticTable” .
It may not be modified if the value of the
“snL4RealServerHistoryControlStatus” object for this entry
source is equal to valid(1).
snL4RealServerHistoryControlBuck
etsRequested
brcdIp.1.1.4.28.1.1.3
Syntax: Integer Read-write The requested number of data samples that will be saved for
this entry. The number of samples saved in the object
“snL4RealServerHistoryControlBucketsGranted” should be
close to the value of this object. If the value of this object is
modified, then the value of the
“snL4RealServerHistoryControlBucketsGranted” object will be
adjusted according to the new value of this object.
Valid values: 1 – 65535
Default: 50