Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 242)

230 Brocade Virtual ADX MIB Reference
53-1003312-01
Real Server Statistics Table
Real Server Statistics Table
The brcdSlbRSStatsTable shows statistics for Real Server.
brcdSlbRSPortCfgMaxTcpConnRat
e
brcdIp.1.1.4.37.1.2.2.1.17
Syntax: Unsigned32 Read-write Maximum TCP connections per second. Valid values are 1 -
4294967295.
brcdSlbRSPortCfgMaxUdpConnRa
te
brcdIp.1.1.4.37.1.2.2.1.18
Syntax: Unsigned32 Read-write Maximum UDP connections per second. Valid values are 1 -
4294967295.
brcdSlbRSPortCfgServerId
brcdIp.1.1.4.37.1.2.2.1.19
Syntax: Unsigned32 Read-write Converts persist string to the ID of the Real Server. Valid values
are 1024 - 17407.
brcdSlbRSPortCfgProxy
brcdIp.1.1.4.37.1.2.2.1.20
Syntax: TruthValue Read-write Configures Real Server port as proxy. The default is "false".
brcdSlbRSPortCfgTcpOnly
brcdIp.1.1.4.37.1.2.2.1.21
Syntax: TruthValue Read-write When enabled, ServerIron ADX allows traffic to a Virtual port
being load-balanced to a different set of real ports based on its
protocol (TCP or UDP). The default is "true".
brcdSlbRSPortCfgUdpOnly
brcdIp.1.1.4.37.1.2.2.1.22
Syntax: TruthValue Read-write When enabled, ServerIron ADX allows traffic to a virtual port
being load-balanced to a different set of real ports based on its
protocol (TCP or UDP). The default is "true".
brcdSlbRSPortCfgUrl
brcdIp.1.1.4.37.1.2.2.1.23
Syntax: DisplayString Read-only GET or HEAD is an optional parameter that specifies the request
type. By default, HTTP keepalive uses HEAD to retrieve the URL
page. You can override the default and configure the ServerIron
ADX to use GET to retrieve the URL page.
brcdSlbRSPortCfgUsePortPolicy
brcdIp.1.1.4.37.1.2.2.1.24
Syntax: DisplayString Read-only Port policy name that is used for health checks.
brcdSlbRSPortCfgZone
brcdIp.1.1.4.37.1.2.2.1.25
Syntax: DisplayString Read-only The zone name for zone-based DNS health checking.
brcdSlbRSPortCfgRowStatus
brcdIp.1.1.4.37.1.2.2.1.26
Syntax: RowStatus Read-write This object creates, modifies, or deletes the Real Server port
entry.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
brcdSlbRSStatsName
brcdIp.1.1.4.37.1.2.3.1.1
Syntax: L4ServerName N/A The configured name of the Real Server.
brcdSlbRSStatsIpType
brcdIp.1.1.4.37.1.2.3.1.2
Syntax: InetAddressType Read-only The address type of the Real Server.