Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 59)

Brocade Virtual ADX MIB Reference 47
53-1003312-01
MAC port security table
MAC port security interface content table
This table shows the same information as the show port security ethernet <slot/port> CLI
command.
Name, Identifier, and Syntax Access Description
snPortMacSecurityIntfContentTabl
e
brcdIp.1.1.3.24.1.1.3 N/A The MAC Port Security Interface Content table that shows the
MAC port security statistics for an Ethernet interface.
snPortMacSecurityIntfContentEntr
y
brcdIp.1.1.3.24.1.1.3.1 N/A An entry in the MAC Port Security Interface Content table.
snPortMacSecurityIntfContentIfIn
dex
brcdIp.1.1.3.24.1.1.3.1.1
Syntax: InterfaceIndex N/A An entry in the MAC Port Security Interface Content table,
showing the ifIndex value of the local interface.
snPortMacSecurityIntfContentSec
urity
brcdIp.1.1.3.24.1.1.3.1.2
Syntax: Integer Read- write Indicates whether MAC port security is enabled or disabled on
this interface.
•
0 = disabled
•
1 = enabled
snPortMacSecurityIntfContentViol
ationType
brcdIp.1.1.3.24.1.1.3.1.3
Syntax: Integer Read-write The port security violation type for this interface:
•
0 = shutdown
•
1 = restricted
snPortMacSecurityIntfContentShu
tdownTime
brcdIp.1.1.3.24.1.1.3.1.4
Syntax: Unsigned32 Read-write If the snPortMacSecurityIntfContentViolationType is 0
(shutdown), this value indicates the number of seconds the
interface shuts down when the violation occurs.
If the snPortMacSecurityIntfContentViolationType is 1
(restrict), this value will always be 0.
snPortMacSecurityIntfContentShu
tdownTimeLeft
brcdIp.1.1.3.24.1.1.3.1.5
Syntax: Unsigned32 Read only If the snPortMacSecurityIntfContentViolationType is 0
(shutdown), this value indicates the number of seconds before
this interface will be re-enabled.
If the snPortMacSecurityIntfContentViolationType is 1
(restrict), this value will always be 0.
snPortMacSecurityIntfContentAge
OutTime
brcdIp.1.1.3.24.1.1.3.1.6
Syntax: Unsigned32 Read-write The amount of time, in minutes, the MAC addresses learned
on this interface will remain secure. A value of 0 indicates no
aging is in effect.
snPortMacSecurityIntfContentMax
LockedMacAllowed
brcdIp.1.1.3.24.1.1.3.1.7
Syntax: Unsigned32 Read-write The maximum number of secure MAC addresses that can be
locked to this interface.
snPortMacSecurityIntfContentTota
lMACs
brcdIp.1.1.3.24.1.1.3.1.8
Syntax: Unsigned32 Read only The total number of secure MAC addresses that are locked to
this interface.
snPortMacSecurityIntfContentViol
ationCounts
brcdIp.1.1.3.24.1.1.3.1.9
Syntax: Unsigned32 Read only The total number of security violations that occurred on this
interface.