Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 139)

Brocade Virtual ADX MIB Reference 127
53-1003312-01
Broadcast forwarding group
UDP helper table
A UDP Helper Table contains addresses that are used to forward a client’s broadcast request for a
UDP application when the client and server are on different networks. There can be up to four
helper addresses on each interface. Helper addresses can be configured on an Ethernet port or a
virtual interface.
snRtUdpBcastFwdPortNumber
brcdIp.1.2.2.9.2.1.1.2
Syntax: Integer Read-write Shows the port number for which the UDP broadcast forwarding
feature has been enabled. Possible port numbers are:
•
port(68) – bootpc
•
port(67) – bootps
•
port(9) – discard
•
port(53) – dns
•
port(90) – dnsix
•
port(7) – echo
•
port(434) – mobile-ip
•
port(138) – netbios-dgm
•
port(137) – netbios-ns
•
port(123) – ntp
•
port(65) – tacacs
•
port(517) – talk
•
port(37) – time
•
port(69) – tftp
Other application port numbers can also be specified.
snRtUdpBcastFwdPortRowStatus
brcdIp.1.2.2.9.2.1.1.3
Syntax: Integer Read-write Controls the management of the table rows. The values that can
be written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
Name, OID, and Syntax Access Description
snRtUdpHelperTable
brcdIp.1.2.2.9.3.1 None UDP Helper Table
snRtUdpHelperEntry
brcdIp.1.2.2.9.3.1.1 None An entry of the UDP Helper Table.
snRtUdpHelperPortIndex
brcdIp.1.2.2.9.3.1.1.1
Syntax: PortIndex Read only Indicates the port index for a UDP Helper address.
snRtUdpHelperIndex
brcdIp.1.2.2.9.3.1.1.2
Syntax: Integer Read only An index in the UDP Helper Table for this entry.
Valid values: 1– 4.
Name, OID, and Syntax Access Description