Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 33)

Brocade Virtual ADX MIB Reference 21
53-1003312-01
Software Image
snAgSoftwareFeature
(continued)
•
Octet 3, bit 0 – Fast Span
•
Octet 3, bit 1 – Base L3
•
Octet 3, bit 2 – static log buffer
•
Octet 3, bit 3 – L2 POS
•
Octet 3, bit 4 – BI15K
•
Octet 3, bit 5 - L2 ATM
•
Octet 3, bit 6 - ATM
•
Octet 3, bit 7 - NETFLOW
•
Octet 4, bit 0 - SFLOW
•
Octet 4, bit 1 - GVRP
•
Octet 4, bit 2 - GARP
•
Octet 4, bit 3 - Dynamic trunk
•
Octet 4, bit 4 - IGC 8G
•
Octet 4, bit 5 - Rate limit
•
Octet 4, bit 6 - IPC rate limit
•
Octet 4, bit 7 - MPLS
•
Octet 5, bit 0 - ISIS
•
Octet 5, bit 1 - Link aggregation
•
Octet 5, bit 2 - Port dual mode
•
Octet 5, bit 3 - Private vlan
•
Octet 5, bit 4 - MBGP
•
Octet 5, bit 5 - IPV6 protocol vlan
•
Octet 5, bit 6 - X10G
•
Octet 5, bit 7 - FastIron Edge switch/router
•
Octet 6, bit 0 - FDP
•
Octet 6, bit 1 – port tag
Bit 0 is the least significant bit of an octet; bit 7 is the most
significant bit.
Additional bits are added for new features. Check the MIB file for
the software version you are running.
snAgGblEnableModuleInserte
dTrap
brcdIp.1.1.2.1.47
Syntax - INTEGER Read-write Indicates whether the SNMP agent process is permitted to
generate hardware module inserted to chassis traps.
snAgGblEnableModuleRemov
edTrap
brcdIp.1.1.2.1.47
Syntax - INTEGER Read-write Indicates whether the SNMP agent process is permitted to
generate hardware module removed from chassis traps.
snAgGblTrapMessage
brcdIp.1.1.2.1.47
Syntax - DisplayString Read only A generic trap message string.
snAgGblEnableTelnetServer
brcdIp.1.1.2.1.47
Syntax - INTEGER Read-write Enable or disable telnet server in device.
snAgGblTelnetPassword
brcdIp.1.1.2.1.47
Syntax - DisplayString Read-write Telnet Access Password and this is only allowed to use for setting
but not for reading.An SNMP-Get will get an zero string.
snAgBuildDate
brcdIp.1.1.2.1.47
Syntax: DisplayString Read only Shows the date when the software was built. It can display up to
32 characters.
Name, OID, and Syntax Access Description