GW Instek GBS-1000 Series Programming Manual - Manual (Page 17)

COMMAND SET
17
System Commands
*IDN?...........................................................................17
*LRN?.................. .........................................................17
*RCL………………….. ......................................................19
*RST…………. ................................................................19
*SAV………... .................................................................19
*IDN?
Set
Query
Description Returns oscilloscope ID as Manufacturer, Model
No, Serial No, Firmware version.
Syntax *idn?
Return parameter <string> Scope id
Example
*idn?
> GW,GBS-1062,
ZZ1234567891,V1.00
BXXXX_1
Returns the scope id.
*LRN?
Set
Query
Description Returns the oscilloscope settings as a string
Syntax *lrn?
Return parameter <string> scope settings
Example *lrn?
>:SYSTem:TIMe 13 47 4;DATe 16 12
2013;:TRIGger:TYPe 0;COUPle 0;LEVel
0.000E+00;MODe 1;NREJ 0;REJect 0;SLOP