GW Instek GBS-1000 Series Programming Manual - Manual (Page 56)

GBS-1000 Programming Manual
56
:MEASure:FFFDelay
Query
Description Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayFFF)
Syntax < Long > < Short >
:measure:fffdelay? :meas:fffd?
Returns <NR3>
Before this
command Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:fffdelay? Select channel 1 and 2
as delay source1/2,
then measure the FFF.
:MEASure:FFRDelay
Query
Description Returns the delay between the first falling edge of
source1 and the first rising edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayFFR)
Syntax < Long > < Short >
:measure:ffrdelay? :meas:ffrd?
Returns <NR3>
Before this
command Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:fffdelay? Select channel 1 and 2
as delay source1/2, and
then measure FFF.