GW Instek GBS-1000 Series Programming Manual - Manual (Page 63)

COMMAND SET
63
:MEASure:PWIDth?
Query
Description Returns the first positive pulse width.
Same as: Measure key → F1~F5 → F3 (+Width)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:pwidth? Select channel 1, then
measure positive pulse
width.
:MEASure:RISe?
Query
Description Returns the first pulse rising edge timing.
Same as: Measure key → F1~F5 → F3 (RiseTime)
Syntax < Long > < Short >
:measure:rise? :meas:ris?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:rise? Select channel 1, then
measure rising edge
timing.