GW Instek GBS-1000 Series Programming Manual - Manual (Page 82)

GBS-1000 Programming Manual
82
2 High frequency rejection
Example :trigger:reject 0 Turns frequency
rejection off.
:TRIGger:SLOPe
Set
Query
Description Sets or queries the trigger slope settings.
Same as: Trigger MENU key →
F5(Slope/Coupling)→F1(Slope).
Syntax < Long > < Short >
:trigger:slope < 0 | 1 >
:trig:slope? :trig:slop < 0 | 1 >
:trig:slop?
Parameter/Return
parameter <NR1>
0 Rising slope
1 Falling slope
Example :trigger:slope 0 Sets the slope to rising.
:TRIGger:SOURce
Set
Query
Description Sets or queries the trigger source.
Same as: Trigger MENU key → F2(Source).
Syntax < Long > < Short >
:trigger:source <0|1|2|3|4>
:trig:source? :trig:sour <0|1|2|3|4>
:trig:sour?
Parameter/Return
parameter <NR1>
0 Channel 1
1 Channel 2
2 Channel 3
3 Channel 4
4 Line