GW Instek GBS-1000 Series Programming Manual - Manual (Page 50)

GBS-1000 Programming Manual
50
Hardcopy Command
:COPY…………… ............................................................ 50
:HARDcopy:INKSaver .................................................. 50
:HARDcopy:LAYout ..................................................... 51
:HARDcopy:MODe ...................................................... 51
:HARDcopy:RATio ....................................................... 52
:COPY
Set
Description Runs Hardcopy (printout, save image, save all).
Same as: Hardcopy key
Syntax :copy
:HARDcopy:INKSaver
Set
Query
Description Selects or returns Inksaver On/Off in Hardcopy.
Same as: Utility key → F1(Hardcopy) → F2 (Ink Saver)
Syntax < Long > < Short >
:hardcopy:inksaver <Boolean>
:hardcopy:inksaver? :hard:inks <Boolean>
:hard:inks?
Parameter <Boolean> Inksaver On/Off
0 Inksaver Off
1 Inksaver On
Example :hardcopy:inksaver 1 Turn On inksaver