GW Instek GBS-1000 Series Programming Manual - Manual (Page 58)

GBS-1000 Programming Manual
58
:MEASure:FREQuency?
Query
Description Returns the frequency value.
Same as: Measure key → F1~F5 → F3 (Frequency)
Syntax < Long > < Short >
:measure:frequency? :meas:freq?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:frequency? Select channel 1, then
measure frequency.
:MEASure:FRFDelay
Query
Description Returns the delay between the first rising edge of
source1 and the first falling edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayFRF)
Syntax < Long > < Short >
:measure:frfdelay? :meas:frfd?
Returns <NR3>
Before this
command Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:frfdelay? Select channel 1 and 2
as delay source1/2, and
then measure FRF.