GW Instek GBS-1000 Series Programming Manual - Manual (Page 62)

GBS-1000 Programming Manual
62
:MEASure:PDUTy?
Query
Description Returns the positive duty cycle ratio.
Same as: Measure key → F1~F5 → F3 (DutyCycle)
Syntax < Long > < Short >
:measure:pduty? :meas:pdut?
Returns <NR2> as the percentage
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:pduty? Select channel 1, then
measure positive duty
cycle.
:MEASure:PERiod?
Query
Description Returns the period value.
Same as: Measure key → F1~F5 → F3 (Period)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:period? Select channel 1, then
measure period.