GW Instek GBS-1000 Series Programming Manual - Manual (Page 83)

COMMAND SET
83
Example :trigger:source 0 Sets the trigger source
to CH1.
:TRIGger:TYPe
Set
Query
Description Sets or queries the trigger type.
Same as: Trigger MENU key → F1(Type).
Syntax < Long > < Short >
:trigger:type < 0 | 1 | 2 >
:trig:type? :trig:type< 0 | 1 | 2 >
:trig:type?
Parameter/Return
parameter <NR1>
0 Edge
1 Video
2 Pulse
Example :trigger:type 0 Sets the trigger type to
edge.
:TRIGger:VIDeo:FIELd
Set
Query
Description Sets or queries which field the video trigger will
trigger on.
Same as: Trigger MENU key → F5(Field). (Note:
Only when trigger = video.)
Syntax < Long > < Short >
:trigger:video:field < 0 | 1 | 2 >
:trigger:video:field? :trig:vid:fiel < 0 | 1 | 2>
:trig:vid:fiel?
Parameter/Return
parameter <NR1>
0 Line
1 Odd frame (field 1)
2 Even frame (field 2)
Example :trigger:video:field 2 Sets the video trigger to
trigger on field 2.