GW Instek GBS-1000 Series Programming Manual - Manual (Page 55)

COMMAND SET
55
:MEASure:DELAY2
Set
Query
Description Sets or returns the second source channel for the
delay automatic measurement.
Same as: Measure key → F1~F5 → F2 (Source2)
Syntax < Long > < Short >
:measure:delay2 <NR1>
:measure:delay2? :meas:delay2 <NR1>
:meas:delay2?
Parameter <NR1>
1 ~ 4 Channel1 ~ 4
Example :measure:delay1 1 Select Channel1 as the
second source channel.
:MEASure:FALL
Query
Description Returns the falltime measurement result.
Same as: Measure key → F1~F5 → F3 (Fall Time)
Syntax < Long > < Short >
:measure:fall? :meas:fall?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:fall? Select channel 1, then
measure fall time.