GW Instek GBS-1000 Series Programming Manual - Manual (Page 71)

COMMAND SET
71
:MEMory<X>:RECall:WAVeform
Set
Description Recalls a waveform from the internal memory and
saves to a reference waveform.
Same as: Save/Recall key → F1(More) → F4(Recall
Waveform)
Syntax < Long > < Short >
:memory<x>:recall:waveform
<NR1> :mem<x>:rec:wav
<NR1>
Parameter <X> Internal memory
1 ~ 20 W1 ~ W20
<NR1> Reference waveform
1 ~ 4 RefA ~ RefD
Example :memory1:recall:waveform 1 Recall the waveform
from internal memory
W1 and save it to
Reference waveform A
:MEMory<X>:SAVe:SETup
Set
Description Saves the panel setup to the internal memory.
Same as: Save/Recall key → F1(More) → F4(Recall
Waveform)
Syntax < Long > < Short >
:memory<x>:save:setup :mem<x>:sav:set
Parameter <X> Internal memory
1 ~ 20 W1 ~ W20
Example :memory1:save:setup Save the setup to
internal memory W1.