GW Instek GBS-1000 Series Programming Manual - Manual (Page 26)

GBS-1000 Programming Manual
26
:CHANnel<X>:EXPand
Set
Query
Description Sets the expansion mode as from ground or from
center for a selected channel. Queries the Expand
status of a channel.
Same as: Channel keyExpand
Syntax < Long > < Short >
:channel<X>:expand <Boolean>
:channel<X>:expand? :chan<X>:exp
<Boolean>
:chan<X>:exp?
Parameter <X> Channel <NR1> Expand
1/2/3/4 CH1/2/3/4 0 Ground
1 Center
Example :channel1:expand 1
:channel1:expand?
1 Sets Channel 1 to
Expand from Center.
Returns expand from
center (1) as channel 1’s
Expand status.
:CHANnel<X>:INVert
Set
Query
Description Inverts channel or returns the status.
Same as: Channel key → F2
Syntax < Long > < Short >
:channel<X>:invert <NR1>
:channel<X>:invert? :chan<X>:inv <NR1>
:chan<X>:inv?
Parameter <X> Channel <NR1> Channel invert
1/2/3/4 CH1/2/3/4 0 Invert Off
1 Invert On
Example :channel1:invert 1 Invert Channel1