GW Instek GBS-1000 Series Programming Manual - Manual (Page 68)

GBS-1000 Programming Manual
68
:MEASure:VMAX
Query
Description Returns the maximum amplitude.
Same as: Measure key → F1~F5 → F3 (Vmax)
Syntax < Long > < Short >
:measure:vmax? :meas:vmax?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:vmax? Select channel 1, then
measure maximum
amplitude.
:MEASure:VMIN
Query
Description Returns the minimum amplitude.
Same as: Measure key → F1~F5 → F3 (Vmin)
Syntax < Long > < Short >
:measure:vmin? :meas:vmin?
Returns <NR3>
Before this
command Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example :measure:source 1
:measure:vmin? Select channel 1, then
measure minimum
amplitude.