GW Instek GSP-930 User Manual - Manual (Page 112)

GSP-930 User Manual
110
Preset Type Settings
Description Each time the
Preset key is pressed, a set of
preset configuration settings are loaded. The
preset configuration settings can be either the
factory default settings or the user-defined
settings.
Operation 1. Press
System
>Pwr On/Preset[F5]>Preset Type[2]
and choose the preset type:
User Preset[F1]
Factory Preset[F2]
Power on Preset Settings
Description When the spectrum analyzer is turned on,
either the preset configuration settings are
loaded (default) or the configuration settings
that were used before the instrument was
turned off.
Operation 1. Press
System
>Pwr On/Preset[F5]>Power On[F1]
and choose the power on settings:
Power On: Last, Preset
Note
See Preset Type Settings on page 209 for details on
the preset conditions.
The last preset conditions cannot be loaded if the
instrument was not powered down correctly the
last time it was used. Please see page 27 for
details.