GW Instek GSP-930 User Manual - Manual (Page 120)

GSP-930 User Manual
118
Channel power and total
power results
CH BW
3. Press OCBW Setup[F3] to enter the OCBW
setup:
CHBW[F1] Set the channel
bandwidth.
CH SPC[F2] Set the channel space
between main channels.
OCBW%[F3] Set the % of the OCBW
to CHBW.
Move Channels
Up/Down 1. Press
Meas
> Channel Analysis[F1] and select:
Channel Move Up[F5] Next main channel.
Channel Move
Down[F6]
Previous main channel.
Note
The channel space (CH SPC) parameter
determines where the next main channel is
located.
The CH SPC parameters from the ACPR and
OCBW setups are independent.